More Views


Liquid membrane waterproofing for floors and walls – withstands equivalent of 20m head of positive water pressure.
  • Extremely tough (70N/mm.sq) waterproof coating
  • Non-toxic and non-taint
  • Fast drying. Touch dry in approx.1 hour
  • Highly flexible with an elongation breakpoint at 350%
  • Adheres to virtually any substrate including damp surfaces

* Required Fields

Reset Options

Quantity Calculator



You may also need

Price for all selected : £0.00
  1.    This itemAquaguard



Typical Uses:

Ideal for the lining and tanking of floors and walls, including basements, to provide a waterproof barrier. Also suitable for use under ceramic tiling and self-smoothing screeds.

Aquaguard is a fast drying, single pack liquid membrane waterproofing system having outstanding flexibility and elasticity with excellent resistance to water pressure, water vapour permeability, and abrasion. It is the professional solution for the waterproofing of concrete and masonry structures.

  • Easy to use, single pack product
  • UV resistant once cured
  • Apply by brush, roller or airless spray


Number of parts:1
Application temperature:Above 7oC
Curing time:Between 1 and 12 hours
Coverage:5L – 9m2
20L – 36m2
Number of coats:2 or 3

Please consult the technical data sheet for full product technical data.

View FileAquaguard Technisches Datenblatt    Size: (166.65 KB) View FileAquaguard Technical Data Sheet    Size: (347.53 KB) View FileAquaguard Safety Data Sheet    Size: (101.4 KB)


Thorough substrate preparation is essential.
The substrate must be sound, clean and free of loose or friable materials, dust, chalk, oil and grease contamination, mould or algae.
All surfaces should be smooth with a trowelled or brushed finish, and brick-work should be flush pointed. Aquaguard may be applied to damp surfaces but any surface water must be removed.

No priming is necessary.
Very dry surfaces may be dampened with water to assist adhesion.

Stir thoroughly before use.
Aquaguard must be applied to a minimum of 0.6mm Dry Film Thickness (DFT) to provide a vapour barrier. This may be applied by brush, roller or airless spray.
Brush and roller – apply to recommended DFT by a minimum of two coats, re-coating at right angles, when the previous coat is touch dry, normally after one hour, and in any case not exceeding 24 hours to ensure a good intercoat bond.
If a screed is to be applied over the Aquaguard membrane, the second coat may be used as a primer for this screed.
Airless spray – the recommended 0.6mm DFT maybe achieved in a single application.


Product Questions

What size of tip is required for Airless spray to be used
Question by: Jim Dickson on 5 Feb 2016 20:35:00
You will need an Aro Gun model - 651533 onto a Clemco Pot.
Air supply pressure 800psi
Compression ratio of 28-1
Tip Size 0.64mm
Fan Width 200mm
Answer by: Guy Stanton (Admin) on 4 Mar 2016 11:14:00
You must be logged in to answer questions.

Customer Reviews

Login, and be the first to review this product

Add a Review

Other Products You May Need

  • Paint Brushes

    Paint Brushes

    From Only: £2.25
    For applying floor & roof coatings and solvents.
  • Professional Roller Kits

    Professional Roller Kits

    High quality easy to use and long lasting roller kits
  • Mixing Paddles

    Mixing Paddles

    For thorough and effective mixing of two-part products.
  • Aquatex


    From Only: £76.50
    A cement based, waterproof, self levelling compound wall coating – withstands equivalent of 5m head of negative water pressure.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Please wait...

Product Successfully Added to Your Cart