Colormet Ultra Solvent Based - Clearance

Typical Uses:

Ideal for machinery, tank exteriors, racking, metal stairways, railings, street furniture and playground equipment.

The ultimate enamel coating for metal, that may be applied directly to rusted surfaces with little preparation and generally no priming. Colormet Ultra cures very quickly to form an extremely tough, scratch resistant, highly flexible gloss coat.

• Minimum application temperature 5^oC
• Low odour, white spirit dilutable formulation

Coverage: 25-30sq.m

Bargain Basement

500ml Mid Green – Surplus from 3L – Only £13.00

Preparation:
Surface must be clean, dry and free of oil, grease or other contamination. Existing paint should be lightly abraded to provide a mechanical key. Any loose flaking paint or friable surface should be removed back to sound material.
Timber substrates should be clean, dry and sanded before Colormet Ultra WB is applied direct.
Metal, plastic or mineral substrates must be primed with Colormet Adhesion Primer WB and should be prepared according to the relevant Data Sheet.

Application:
Mechanical stirring with a mixing paddle for a few minutes is recommended.
Colormet Ultra WB may be applied by brush, roller, conventional spray gun or airless spray.
Brush or roller – thin if necessary with up to 5% of water.
Conventional spray – thin with 10-15% of water, use 1.5-2mm nozzle and 2-3 bars pressure. Conventional spraying may result in a slightly lower gloss.
Airless spray – thin with 3% of water, use nozzle size 11-13 and 120 bars pressure.