Flortex PU Cove Mix is a 100% solids three-part polyurethane mix designed for the coating of coving and forming radius coves.
Use on: Moisture-free concrete floors. Use where: Internal Typical industries: Food manufacturing and processing, dairies, commercial kitchens, pharmaceutical and chemical plants. Type of job: Heavy duty industrial areas requiring a seamless, professional finish
Approximate coverage: 5 linear metres at 100mm x 50mm (2" radius) Cure time: Light traffic 12hours@ 20oC Heavy duty traffic - 48 hours Full chemical cure - 7 days
We strongly recommend that this product is installed only by our fully trained and highly skilled tradesmen. We offer a nationwide competitive, reliable and professional service. Please call our Technical Sales team to discuss your project.
Bargain Basement – 30% OFF
5 x 16kg units Dark Green – Surplus Returns
Pot life: 15 mins @ 20oC Application temperature: 15oC - 25oC Initial cure: 4 - 6 hours Light traffic: 12 hours Full traffic: 48 hours Number of parts supplied: 3
Please consult the technical data sheet for full technical product data.
Thorough substrate preparation is essential.
The screed or substrate should be mechanically prepared to a clean, sound and dry surface with a good mechanical key.
All surfaces should be treated with a suitable primer. Application of Flortex PU Cove Mix should be applied onto the tacky primer, typically 45-60 mins after application in order to achieve a sound adhesive bond.
Mix the coloured base component to an even consistency, ensuring the re-dispersion of any settled pigment.
Thoroughly scrape the contents of the base and hardener components into the same container and mix thoroughly for one minute.
Pour the combined base and hardener into a rotary drum mixer and add the aggregate component steadily, mixing for a minimum of 3 minutes, until a homogeneous mix of the three parts is achieved.
Apply to pre-primed areas with a coving trowel to form the skirting as required.
Due to the different aggregates used in this vertical grade material, a variation in surface texture and colour density must be expected. Where a closer colour match is required to adjacent surfaces then Flortex PU Screed Seal should be used to overcoat the Cove Mix within 24 hours of application.
Application thickness is typically 2-9mm (vertically 4mm maximum)
Product QuestionsNo questions yet. Be the first to ask the question!