Flortex PU Twin Pack has been created to provide a totally impervious hard wearing floor sealer.
The polyurethane formulation will adhere to a wide range of substances including walls and floors, and will reduce porosity whilst providing a dustproof surface. The coating is not only UV light resistant but is also extremely easy to clean.
Coverage: approx 8-10m2 per litre
Pot life: 1 - 2 hours @ 20oC Application temperature: 10oC - 30oC Initial curing time: 6 - 8 hours Light traffic: 12 - 16 hours Full traffic: 2 days Recoat time: 6 - 8 hours Number of parts supplied: 2 Priming required: Porous surfaces should be primed with WD Primer
Please consult the technical data sheet for full technical product data.
Thorough substrate preparation is essential.
Surfaces to be coated must be clean, dry and free of loose contaminants.
Air temperature minimum 5oC, maximum 30oC, humidity 70% RH maximum. Ensure good drying conditions prevail throughout the application and cure of the product.
Having fully prepared the substrate, stir the individual components before mixing together.
Add Part 'B' to Part 'A' and thoroughly mix for at least 3 minutes. For best results use a heavy duty slow speed drill with a mixing paddle.
Care must be taken when mixing to ensure that the hardener is properly dispersed.
Ensure thorough mixing as an unmixed product will result in a poor or non-cure situation.
This product can be applied by brush or roller at a thickness of 40 microns.
Product QuestionsNo questions yet. Be the first to ask the question!