Suitable for both interior and exterior applications. All metal surfaces including roofing, cladding, harbour and offshore decks, structures and cranes, tanks and ducting, cables, nuts and bolts.
Extremely easy to apply by brush or roller, Polydex forms a highly elastic, anti-rust membrane which is impermeable to water and highly resistant to weathering, mechanical and chemical attack. Its specialist formulation includes high quality anti corrosive pigments, achieving a galvanic protection against corrosion.
Polydex Standard has been discontinued and the remaining stock
is available at discounted prices.
1 x 3.5kg Unit Standard in White (Part Used) at 40% OFF
1 x 10kg Unit High Build in Light Grey (Part Used) at 40% OFF
3 x 5kg Units High Build in Dark Grey
2 x 5kg Units High Build in RAL 7016 (Dark grey)
Application temperature: 8oC to 55oC Touch dry (@ 20oC): 1.5 hours Rain resistant: 3 hours Recoat time: Minimum of 6 hours Coverage: 5 sq.m. per kg Number of coats required: 2 Number of parts supplied: 1 Priming required: See technical data sheet
Please consult the technical data sheet for full technical product data.Safety Data Sheet Technical Data Sheet
The surface should be clean, dry, free of all old or flaking coatings, mill scale or loose rust.
The surface has to be dust free and made rust free by means of sandblasting (Sa2, St2) or high pressure water jetting (min. 600 bars). After jetting, the substrate has to be dust free. Oil and grease should be removed using Polycote Degrease™ IT. The surface must be dry and dust-free before coating.
New galvanised surfaces require a primer. For old galvanised surfaces, plastisol sheeting and smooth concrete prime with 1 coat of Polydex™ Standard, thinned 15% with water, followed by 1 full coat.
On non-ferrous substrates, use Polydex Adhesion Primer as a primer coat first.
Polydex™ Standard may be applied by brush, roller, conventional spray gun or airless spray.
Brush, roller or conventional spray – apply 2 coats of undiluted product, allowing at least 6 hours between coats.
Airless spray – use nozzle size 11-13 and 220 bars pressure. Dilute product with maximum 3% of water. During work stoppage, immerse nozzle in water, empty and clean the tubes.
Product QuestionsNo questions yet. Be the first to ask the question!