Stormcoat ARM - Clearance

More Views

Stormcoat ARM - Clearance
High performance acrylated rubber paint. Resistant to pressure washing and wind driven rain.
Showerproof in only 30 minutes.
  • Resists wind driven rain
  • Resistant to pressure washing
  • High chemical resistance
  • Touch dry in only 1 hour, recoatable after 12 hours
  • Adheres to all masonry, stone and asbestos
  • Excellent protection of all external masonry

* Required Fields

Reset Options

Stormcoat ARM - Clearance
5 litres

Regular Price: £86.80

Special Price £65.00

You may also need

Price for all selected : £0.00
  1.    This itemStormcoat ARM - Clearance



Stormcoat ARM is a highly durable, smooth matt finish masonry coating based on a pliolite resin binder, which can be applied throughout the year and in low temperature conditions. Becomes showerproof within 30 minutes of application.

Excellent protection from algae and fungal attacks, and extreme conditions. Being of a micro-porous nature, this actually increases the resistance to dirt pick up.

Apply by brush or roller

Coverage: 40-50sq.m per unit. Please remember that if you are applying to a rough finish (particularly pebbledash), that your coverage requirements will be far higher. As a 'rule of thumb', every time you go up and over each stone, you've actually doubled your coverage...!

Supplied in 5 litre units.

1 x 5L Unit Sandstone (Non-standard colour)



Application temperature:Minimum 5oC
Touch dry (@ 20oC):1 hour
Hard dry:3 hours
Recoat time:12 hours
Number of parts supplied:1
Priming required:No

Please consult the technical data sheet for full technical product data.

Safety Data Sheet Technical Data Sheet


Ensure surfaces are clean, dry and free from dirt, grease and other contamination. Unsound surfaces should be scraped back to a sound line and brushed clean, wash with strong bleach solution if bacterial contamination is present. Apply a sealer coat of masonry paint thinned with 15% Stormcoat Thinner if chalky and unsound conditions prevail. Please contact Polycote Technical helpline for relevant Data Sheets.
Do not apply to damp or frosted surfaces, or in wet conditions.

Apply by brush or roller. It is most important that the drum is well stirred before use. Should the surface be particularly porous, add 15% Stormcoat Sealer to the first coat as this will enable a good penetration into the substrate that will obviously help to achieve a maximum seal against the rain, etc. Two full coats will cover most surfaces.


Product Questions

No questions yet. Be the first to ask the question!

Customer Reviews

Login, and be the first to review this product

Add a Review

Other Products You May Need

  • Paint Brushes

    Paint Brushes

    From Only: £2.25
    For applying floor & roof coatings and solvents.
  • Professional Roller Kits

    Professional Roller Kits

    From Only: £57.32
    High quality easy to use and long lasting roller kits
  • Destroy IT

    Destroy IT

    Fungicidal wash solution – ideal to prevent regrowth of algae and similar weeds.

Please wait...

Product Successfully Added to Your Cart