Aquaplug Water Leak and Crack Repair Mortar

More Views

Aquaplug Water Leak and Crack Repair Mortar
Ultra rapid setting water leak plugging mortar – it will stop leaks in only 3 minutes!!!
  • Non-shrink formula for total fill
  • No priming needed
  • Very easy to use
  • Stops leaks in only 3 minutes!!

Aquaplug Water Leak and Crack Repair Mortar
10 kg

£76.20
  • Buy 5 for £72.75 each
  • Buy 10 for £69.40 each
  • Buy 20 for £67.30 each

You may also need

Price for all selected : £0.00
  1.    This itemAquaplug Water Leak and Crack Repair Mortar

Request Quote
Or call: 0800 980 0852 / 01234 846400

Details

Details

When sealing a crack or gap against escaping water, there's nothing so astoundingly effective as Aquaplug. This highly specialised cementitious powder mix is simply mixed with a small amount of water and forced into the repair area by trowel or gloved hand. Within just 3 minutes it's cured and the flow is permanently stopped!

Aquaplug is a ready to use extremely fast-setting cement based mix incorporating chemical modifiers and selected graded aggregates. Simply mixed with water, the shrinkage compensated mix ensures total fill of the applied area for instant and permanent stemming of water flow.

- Stops leaks in only 3 minutes!!

- Primarily designed for use with concrete.

- Aquaplug will also adhere to brick and blockwork.

Typical Uses:
Sealing of basements, concrete pipes, sewage systems and foundations. Also used for creating corner fillets prior to tanking with Polycote Aquatex / Aquaguard.

Unit size: 10kg – makes 5.5 litres when mixed

Specifications

Specification

Pot life:2 - 5 mins @ 20oC
Application temperature:5oC to 35oC
Number of parts supplied:2
Priming required:No

Please consult the technical data sheet for full technical product data.

Technical Data Sheet View FileAquaplug Technisches Datenblatt    Size: (73.11 KB) View FileAquaplug Safety Data Sheet    Size: (61.92 KB) View FileAquaplug Technical Data Sheet    Size: (305.08 KB)
Application

Application

Preparation:
Ensure contact surfaces are sound, clean and provide a good mechanical key.
Remove all loose material, plaster and paint.
Oily deposits should be treated with Polycote Degrease IT – see relevant data sheet.
Cracks should be cut back to a minimum of 20mm depth and width, undercutting if possible.
If concrete surfaces are dry, dampen with water immediately before application of Aquaplug to assist adhesion.


Mixing:
Do not mix more than can be applied in 2 minutes.
Mix approximately 4 parts powder by volume to 1 part water.
Consistency of the mix depends on application – semi-wet mix for damp cracks or fillets, put a stiffer mix in when placing against active water. The water content should be adjusted accordingly.
Mixing should be carried out using a gloved hand.


Application:
Place the mixed material in place IMMEDIATELY, pressing firmly into the crack or fillet using a fillet trowel.
When working against water pressure work toward the point of highest pressure and finish with a gloved hand, forcing the material against the pressure and holding there until set. Cut off excess material from face within 3 minutes.
Dampen repair surface after application.

Q&A

Product Questions

No questions yet. Be the first to ask the question!

Customer Reviews

Login, and be the first to review this product

Add a Review

Other Products You May Need

  • 7 inch Trowel

    7 inch Trowel

    £8.95
    High quality 7 inch trowel
  • Mixing Paddles

    Mixing Paddles

    £18.90
    For thorough and effective mixing of two-part products.
  • Easi-Fil

    Easi-Fil

    From Only: £52.06
    Excellent for filling of fine cracks, holes and surface imperfections. Very strong, cures in only 20 minutes and can be sanded / painted straight away.
  • Aquatex

    Aquatex

    From Only: £69.80
    Cement based waterproof wall coating – withstands equivalent of 5m head of negative water pressure.

Please wait...

Product Successfully Added to Your Cart