Drive Coat is a high quality water-based acrylic coating providing a tough, long-lasting slip-resistant finish for macadam and concrete. It conforms to BS7044 slip resistance specification.
Will transform driveways, cycleways, sports tracks and arenas or any other off road macadam or concrete surface.
A high quality water-based acrylic coating providing a tough, long-lasting slip-resistant finish for macadam and concrete.
Not suitable for heavy traffic areas. Slip resistance conforms to BS7044
Surfaces should be DRY, NOT DAMP and free from loose or flaking material, dirt, grease and vegetable matter. Vacuum or pressure blasting with air or water may remove any debris. Manual or machine brushing may be suitable.
Powerfloated, chemically/ mechanically hardened, hand floated or tamped concrete surfaces should be shotblasted or treated with Polycote Etch IT to remove weak laitence and provide a surface key.
Friable porous concrete should be stabilised with a coating of Tarmac Binder prior to application of Drive Coat.
Do not apply if there is salt contamination or frost.
Stir well before use.
Apply an even coat by brush, roller or airless spray, using a tip size of 0.7mm (28 thou).
A new macadam surface should be left for at least four weeks to oxidise (longer in winter than in summer) before painting.
New concrete should be allowed to mature for several months before coating.
The best time to apply Drive Coat is between April and October.
Apply 2 coats.
Product QuestionsNo questions yet. Be the first to ask the question!