More Views

EPS Primer

Chemical resistant epoxy primer for metalwork
  • Long pot life – easy to use to prime intricate areas
  • High level of chemical resistance
  • Anti-corrosion pigment

EPS Primer
5 kg

  • Buy 10 for £95.60 each
  • Buy 20 for £88.00 each
  • Buy 50 for £80.50 each

You may also need

Price for all selected : £0.00
  1.    This itemEPS Primer

Request Quote
Or call: 0800 980 0852 / 01234 846400



A unique, hard-wearing, totally impervious and chemically resistant solvent based formulation with the advantage of an 18 hour pot life, making it ideal for intricate work.

Use on: Metal
Use where: Internal/External
Typical industries: Any industry where durable coating is required around metalwork.
Type of job: Ideal for floors, ramps, machinery, tanks, pipework and ducting


Pot life:16 hours @ 20oC
Application temperature:10oC - 30oC
Approximate coverage: 5 kg unit - 15 - 20m2
Cure time: Initial cure- 6 - 8 hours @ 20oC
Re-coat after 4 hours
Full cure - 7 days
Number of parts supplied:2
Primer for:Polycote epoxy topcoats

Please consult the technical data sheet for full technical product data.

View FileEPS Primer Safety Data Sheet    Size: (188.6 KB) View FileEPS Primer Technical Data Sheet    Size: (247.71 KB)


Surface must be clean, dry and free from dirt, grease and other contamination.
Previous paint should be removed, or if this is not feasible, the product should be tested on a small area first to ensure compatibility with the existing coating. Scale or rust should be removed as far as possible. No loose or flaking rust should remain. Exposed metal surfaces should ideally be prepared to minimum Sa2 standard and primed within 2 hours.

Having fully prepared the substrate, stir the individual components before mixing together. Add part 'B' to part 'A' and thoroughly mix for at least 3 minutes. For best results use a heavy duty slow speed drill with a mixing paddle.
Ensure thorough mixing as an unmixed product will result in a poor or non-cure situation.
Keep all components at room temperature for 24 hours before use.

Apply by brush, roller or airless spray, making sure that the surface is completely covered. Particular attention should be given to protrusions and other areas of high potential wear. When finished, DO NOT scrape the remaining contents from the container as this will invariably include unmixed raw resin.


Product Questions

No questions yet. Be the first to ask the question!

Customer Reviews

Login, and be the first to review this product

Add a Review

Other Products You May Need

  • Paint Brushes

    Paint Brushes

    From Only: £2.25
    For applying floor & roof coatings and solvents.
  • Professional Roller Kits

    Professional Roller Kits

    High quality easy to use and long lasting roller kits
  • Mixing Paddles

    Mixing Paddles

    For thorough and effective mixing of two-part products.
  • Easi-Fil


    From Only: £55.80
    Excellent for filling of fine cracks, holes and surface imperfections. Very strong, cures in only 20 minutes and can be sanded / painted straight away.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Please wait...

Product Successfully Added to Your Cart