Easi-Screed Primer

More Views

Easi-Screed Primer
High penetration primer, used to seal porous / open texture concrete surfaces prior to application of Polycote Easi-Screed.
  • Seals porous surfaces
  • Promotes adhesion of cementitious screeds
  • Prevents pin-holling of applied topping
  • Offers excellent water resistance

Easi-Screed Primer
5 litres

£59.80
  • Buy 5 for £57.75 each

You may also need

Price for all selected : £0.00
  1.    This itemEasi-Screed Primer

Request Quote
Or call: 0800 980 0852 / 01234 846400

Details

Details

Easi-Screed Primer is a single pack aqueous based co-polymer dispersion, designed to seal porous surfaces and promote adhesion of cementitious floor levelling compounds.


Use on:Concrete, sand/cement screeds, tamped concrete, plywood, hardboard and chipboard and other porous substrates. Can also be used on non-absorbent surfaces of epoxy membranes, terrazzo, quarry and ceramic tiles.
Use where: Internal/External
Typical industries: Commercial and industrial premises
Type of job: For use prior to an application of an Easi-Screed product. Prevents unacceptably rapid drying times.
Special features: Offers excellent water-resistance and durability, prevents pin-holing of the applied topping caused by air release from unsealed absorbent substrates
Specifications

Specification

Pot life:10- 15 mins @ 20oC
Application temperature:0oC - 30oC
Number of parts supplied:1
Approximate coverage: Undiluted 10m2 per litre, Diluted 20m2 per litre
Cure time: Porous surfaces 20 - 30 mins, Non-porous surfaces 60 mins @ 20oC
Priming for:For use with Polycote Easi-Screed self-levellers

Please consult the technical data sheet for full technical product data.

View FileEasi-Fließestrich Primer Technisches Datenblatt    Size: (458.58 KB) View FileEasi-Screed Primer Technical Data Sheet    Size: (153.98 KB) View FileEasi-Screed Primer Safety Data Sheet    Size: (59.54 KB)
Application

Application

Preparation:
Thorough substrate preparation is essential.
Recommended methods are:
Powerfloated concrete – use a Vacuum Assisted Shotblaster to remove weak laitence and provide a surface key for the coating. If this is not possible, chemically etch with Polycote Etch IT then rinse thoroughly and allow to dry.
Loose paint – remove, using a Vacuum Assisted Shotblaster, Floor Grinder or equivalent method.Loose or friable concrete – use a Vacuum Assisted Shotblaster. If this is not possible, chemically etch with Polycote Etch IT then rinse thoroughly and allow to dry.
Oil or grease – use Hot Compressed Air for large areas of contamination. Smaller, isolated deposits may be chemically cleaned with Polycote Degrease IT, then rinsed thoroughly and allowed to dry.
See relevant Data Sheet prior to application.


Mixing:
Shake well before use. For absorbent surfaces Easi-Screed Primer should be mixed 1 part Primer to 4 parts of clean cold water and stirred until thoroughly dispersed.


Application:
Easi-Screed Primer is best applied by roller.
For porous surfaces, a diluted coat followed by a neat coat of primer should be applied. For non-absorbent surfaces, apply Easi-Screed Primer neat.

Apply evenly and do not allow to puddle in low spots. Easi-Screed Primer must be allowed to dry completely.

Q&A

Product Questions

No questions yet. Be the first to ask the question!

Customer Reviews

Login, and be the first to review this product

Add a Review

Other Products You May Need

  • Mixing Paddles

    Mixing Paddles

    £18.90
    For thorough and effective mixing of two-part products.
  • Spiked Shoes – Pair

    Spiked Shoes – Pair

    £38.95
    Pair of spiked shoes for use with wet coatings and screeds
  • Spiked Roller

    Spiked Roller

    £44.95
    For spike rolling any of our Cretex or Flortex Screeds such as Easi-screed and Flortex PU Screed. Effectively removes air bubbles.
  • Pin Leveller

    Pin Leveller

    £78.50
    600mm pin leveller for screeding

Please wait...

Product Successfully Added to Your Cart