EP Primer XFH

More Views

EP Primer XFH
Fast curing damp tolerant epoxy primer
  • Fast curing – enables top-coat application sooner, reducing downtime
  • Low viscosity for excellent penetration
  • Long lasting damp tolerant primer
  • Suitable for food environments

Quantity Calculator

EP Primer XFH
5 kg

£109.80
  • Buy 5 for £105.90 each
  • Buy 10 for £101.75 each
  • Buy 25 for £97.90 each
  • Buy 50 for £94.80 each

You may also need

Price for all selected : £0.00
  1.    This itemEP Primer XFH

Request Quote
Or call: 0800 980 0852 / 01234 846400

Details

Details

EP Primer XFH is a very fast curing two part epoxy primer. This unique formulation allows the primer to adhere to damp surfaces and cures within 4-6 hours, allowing over-coating to take place the same day.


Use on: Concrete
Use where: Internal/External
Typical industries: Typical industries include medical, animal and foot processing, and environments which require the coating to take place in the same day
Type of job:Preparation of a surface prior to over-coating. To ensure a good inter-coat bond, the topcoat should be applied between 4 and 36 hours after application of the Primer
Approximate coverage: 5kg - up to 20m2
Special features:Low viscosity for excellent penetration, solvent free, damp tolerant non toxic and non taint, fast curing - can be over-coated with Polycote Flortex SG or Polycote WD Primer after only 4-6 hours
Specifications

Specification

Pot life:15 mins @ 20oC
Application temperature:10oC - 25oC
Initial cure time:6-8 hours @ 20oC
Number of parts supplied:2
Primer for:Polycote Flortex product range

Please consult the technical data sheet for full product technical data.

Technical Data Sheet View FileEP Primer XFH Safety Data Sheet    Size: (164.38 KB) View FileEP Primer ESH - Technisches Datenblatt    Size: (976 KB)
Application

Application

Preparation:
Thorough substrate preparation is essential.
Recommended methods are:
Powerfloated concrete – use a Vacuum Assisted Shotblaster to remove weak laitance and provide a surface key for the coating. If this is not possible, chemically etch with Polycote Etch IT then rinse thoroughly and allow to dry.
Loose paint or rust – remove, using a Vacuum Assisted Shotblaster, Floor Grinder or equivalent method. Loose or friable concrete – use a Vacuum Assisted Shotblaster. If this is not possible, chemically clean with Polycote Etch IT then rinse thoroughly and allow to dry.
Oil or grease – use Hot Compressed Air for large areas of contamination. Smaller, isolated deposits may be chemically cleaned with Polycote Degrease IT then rinsed thoroughly and allowed to dry.
See relevant Data Sheet prior to application.
For best results the surface must be dry but EP Primer XFH will tolerate damp surfaces.
Once prepared, the area must be kept clean and free of traffic.

Mixing:
Having fully prepared the substrate, stir the individual components before mixing together. Add part ‘B’ to part ‘A’ and thoroughly mix for at least 3 minutes. For best results use a slow speed drill with a mixing paddle.
Ensure thorough mixing as an unmixed product will result in a poor or non-cure situation.

Application:
Apply immediately by brush, roller or squeegee, making sure that the surface is completely covered, working the primer well into the surface. Failure to do this may allow the floor to ‘breathe’ and result in pinholing or bubbles in the epoxy top coat.
When finished, DO NOT scrape the remaining contents from the container as this will invariably include unmixed raw resin.

Q&A

Product Questions

No questions yet. Be the first to ask the question!

Customer Reviews

Login, and be the first to review this product

Add a Review

Other Products You May Need

  • Paint Brushes

    Paint Brushes

    From Only: £2.25
    For applying floor & roof coatings and solvents.
  • Professional Roller Kits

    Professional Roller Kits

    From Only: £57.32
    High quality easy to use and long lasting roller kits
  • Mixing Paddles

    Mixing Paddles

    £18.90
    For thorough and effective mixing of two-part products.
  • Easi-Fil

    Easi-Fil

    From Only: £34.35
    Excellent for filling of fine cracks, holes and surface imperfections. Very strong, cures in only 20 minutes and can be sanded / painted straight away.

Please wait...

Product Successfully Added to Your Cart