A unique, hard-wearing, totally impervious and chemically resistant solvent based formulation with the advantage of an 18 hour pot life, making it ideal for intricate work.
Use on: Metal Use where: Internal/External Typical industries: Any industry where durable coating is required around metalwork. Type of job: Ideal for floors, ramps, machinery, tanks, pipework and ducting
Pot life: 16 hours @ 20oC Application temperature: 10oC - 30oC Approximate coverage: 5 kg unit - 15 - 20m2 Cure time: Initial cure- 6 - 8 hours @ 20oC Re-coat after 4 hours Full cure - 7 days Number of parts supplied: 2 Primer for: Polycote epoxy topcoats
Please consult the technical data sheet for full technical product data.EPS Primer Safety Data Sheet Size: (188.6 KB) EPS Primer Technical Data Sheet Size: (247.71 KB)
Surface must be clean, dry and free from dirt, grease and other contamination.
Previous paint should be removed, or if this is not feasible, the product should be tested on a small area first to ensure compatibility with the existing coating. Scale or rust should be removed as far as possible. No loose or flaking rust should remain. Exposed metal surfaces should ideally be prepared to minimum Sa2 standard and primed within 2 hours.
Having fully prepared the substrate, stir the individual components before mixing together. Add part 'B' to part 'A' and thoroughly mix for at least 3 minutes. For best results use a heavy duty slow speed drill with a mixing paddle.
Ensure thorough mixing as an unmixed product will result in a poor or non-cure situation.
Keep all components at room temperature for 24 hours before use.
Apply by brush, roller or airless spray, making sure that the surface is completely covered. Particular attention should be given to protrusions and other areas of high potential wear. When finished, DO NOT scrape the remaining contents from the container as this will invariably include unmixed raw resin.
Product QuestionsNo questions yet. Be the first to ask the question!
Other Products You May Need
For applying floor & roof coatings and solvents.
High quality easy to use and long lasting roller kits
£18.90For thorough and effective mixing of two-part products.
Excellent for filling of fine cracks, holes and surface imperfections. Very strong, cures in only 20 minutes and can be sanded / painted straight away.