External Floor Paint is a high solids content external coating. With an extremely tough yet flexible formulation, it copes well with the wear and tear of industrial yards and is oil and chemical resistant.
External Floor Paint is a single pack product, and is extremely easy to lay. The formulation offers short drying times and excellent adhesion, and it can be supplied as a smooth or slip resistant version.
Number of parts: 1 Application Temperature: Above 5oC Drying time: 4 - 6 hours Recoatable: After drying overnight Coverage: 5L – 30-40m2 Number of coats: 2
Please consult the technical data sheet for full technical product data.External Floor Paint Technical Data Sheet Size: (228.06 KB) External Floor Paint Safety Data Sheet Size: (131.27 KB)
Thorough substrate preparation is essential.
The surface must be clean, dry and free from dirt, grease and other contamination. New concrete should be left for at least 3 months before painting, and a moisture check should be carried out to ensure this lies within acceptable limits. Hard concrete or granolithic surfaces should be treated with Polycote Etch IT to improve adhesion, and any surface grease or contamination chemically removed using Polycote Degrease IT. These treatments must be thoroughly rinsed off and the surface allowed to dry before painting. Pits and holes may be filled using Polycote Cretex products. Please refer to relevant Data Sheets.
Stir thoroughly before use to ensure full dispersion of solids throughout the mix.
Apply by roller or brush. If the area has not previously been treated, thin the first coat with 10% White Spirit to improve penetration and adhesion working well into the surface. Apply full second coat. On previously sealed floors apply two full coats. On previously painted surfaces one full coat may provide adequate coverage.
Avoid applying too thickly – two normal coats produce a far better result than one thick one, which may hinder the drying out.
Product QuestionsNo questions yet. Be the first to ask the question!