Flexiline is a road marking system based on pre-formed lines, symbols and letters manufactured from modified BS3262 thermoplastic. Flexiline Tack Coat is used to improve adhesion and create a tough, long lasting solution to linemarking.
Flexiline Tack Coat is ideal where Flexiline is being applied to smooth or concrete surfaces. It is clear when dry and is supplied in easy-to-use 750ml aerosol cans.
Each can should have enough coverage for approximately nine x 5m rolls of Flexiline.
Flexiline Tack Coat will not adhere to surfaces which are contaminated by loose debris, mud, oil, grease or where surface water is present. Sweep and clean the area thoroughly. Dry out any surface wetness using a gas torch.
If application is onto new asphalt, we advise that it is left for at least 6-8 weeks to settle.
If any doubt as to the substrate should arise, complete a test patch before continuing.
Flexiline Tack Coat should be applied by simply spraying the surface that the Flexiline will be applied to.
Allow 10 - 15 minutes for product to dry before applying Flexiline.
Product QuestionsNo questions yet. Be the first to ask the question!