- Details
-
Details
Flortex PU Twin Pack has been created to provide a totally impervious hard wearing floor sealer.
Available in either a matt or gloss finish.
The polyurethane formulation will adhere to a wide range of substances including walls and floors, and will reduce porosity whilst providing a dustproof surface. The coating is not only UV light resistant but is also extremely easy to clean.
Supplied in 5 litre units.
Coverage: approx 8-10m2 per litre
Bargain Basement versions available at big discounts
- Specifications
-
Specification
Pot life: 1 - 2 hours @ 20oC Application temperature: 10oC - 30oC Initial curing time: 6 - 8 hours Light traffic: 12 - 16 hours Full traffic: 2 days Recoat time: 6 - 8 hours Number of parts supplied: 2 Priming required: Porous surfaces should be primed with WD Primer Please consult the technical data sheet for full technical product data.
Flortex PU Twin Pack Technisches Datenblatt Size: (411.11 KB)
Flortex PU Twin Pack Technical Datasheet Size: (244.56 KB)
Flortex PU Twin Pack Safety Datasheet Size: (130.77 KB)
- Application
-
Application
Preparation:
Thorough substrate preparation is essential.
Surfaces to be coated must be clean, dry and free of loose contaminants.
Air temperature minimum 5oC, maximum 30oC, humidity 70% RH maximum. Ensure good drying conditions prevail throughout the application and cure of the product.
Mixing:
Having fully prepared the substrate, stir the individual components before mixing together.
Add Part 'B' to Part 'A' and thoroughly mix for at least 3 minutes. For best results use a heavy duty slow speed drill with a mixing paddle.
Care must be taken when mixing to ensure that the hardener is properly dispersed.
Ensure thorough mixing as an unmixed product will result in a poor or non-cure situation.
Application:
Flortex PU Twin Pack can be applied by brush or roller at a thickness of 40 microns. - Q&A
-
Product Questions
No questions yet. Be the first to ask the question!