Flortex Clearseal is an easy to apply clear concrete floor coating for dust proofing screeds, blockwork and rendered walls.

Typical Uses:

Ideal for factory and warehouse floors, kitchens, food processing areas, garages, workshops, production and plant areas.

A clear, high solids synthetic resin emulsion, designed specifically to protect concrete from dusting. The low viscosity formulation ensures maximum penetration into the capillary pores, strengthening the substrate.

It is very easy to apply by brush or roller and will seal porous surfaces such as concrete screeds, tiles and brickwork

Coverage: approx 8-10m² per litre

For a long lasting floor paint, try ,a href="https://www.polycote.com/uk/flortex-professional/">Flortex Professional.

Application temperature:	5oC - 30oC
Initial cure time:	3 hours
To accept foot traffic:	3 hours
To accept vehicular traffic:	24-36 hours
Overcoat (if required) time:	within 6 hours
Full strength cure time:	7 days
Full tensile strength (MPA):	16.3N/mm2
Elongation:	350%
Cured film hardness:	51 in 24 hours
	64 in 7 days
Number of parts supplied:	1
Coverage:	8-10 sq.m. per 1 litre
Primer required:	No
Shelf life:	18 months
Storage temperature:	+5oC - +35oC

Please consult the technical data sheet for full technical product data.

Flortex Betonversiegelung Technisches Datenblatt    Size: (168.86 KB) Flortex Clearseal Safety Data Sheet    Size: (98.41 KB) Flortex Clearseal Technical Data Sheet    Size: (188.93 KB)

Preparation:
Floor areas must be clean, dry and free of all contamination. Oil and grease deposits may be removed using Polycote Degrease IT in accordance with relevant Data Sheet. The floor must be allowed to dry and cleaned and any dust or debris swept or vacuumed off. Wall surfaces to be sealed should be brushed dry to remove dust and loose material.

Application:
Stir well before use and do not thin. Flortex Clearseal may be applied using a soft brush or broom, a nylon pile roller or squeegee.
A thin, even, puddle-free first coat should be applied, and this must be allowed to dry thoroughly (at least 1-2 hours in warm, dry, well-ventilated conditions, longer if cold and damp) before applying the second coat.