Flortex Cold Cure is extremely low odour and is excellent for food areas, breweries, dairies, fridges, supermarkets, laboratories and offices. An extremely tough, high build, 100% solids epoxy, providing a totally impervious, easy clean gloss finish. Specifically designed for application in temperatures between 0oC and 15oC.
Available in smooth or slip resistant finish
Unit size: 15kgs (smooth) or 20kgs (slip resistant)
Number of parts: 2 Pot Life: 15 minutes Curing Time: 36 hours at 0oC 18-24 hours at 5oC 12-18 hours at 10oC Application Temperature: 0oC to 15oC Coverage: 40 - 60m2 per 15kg unit
Please consult the technical data sheet for full technical product data.Flortex Cold Cure Technical Data Sheet Size: (366.55 KB) Flortex Cold Cure Safety Data Sheet Size: (172.23 KB)
The substrate must be clean, sound, dry and fully cured. Remove all dirt, oil, grease or other surface contaminants by shot blasting or mechanical means.
Before mixing this product you must be totally prepared.
Pour Part 'A' into a suitable mixing vessel and add the powder Part 'B', mixing thoroughly for at least two minutes or until both parts are fully combined. For best results use a heavy duty slow speed drill with mixing paddle.
Once the product is thoroughly mixed, apply immediately using a brush or roller, making sure the area is completely covered. When finished, do not scrape the remaining contents from the container as this will invariably include unmixed raw resin.
Ensure thorough mixing as an unmixed product will result in a poor or non-cure situation.
Product QuestionsNo questions yet. Be the first to ask the question!