More Views

Ultra Fast Drying Line Marking Paint - Single Pack

Quickline EP

A very fast curing single pack epoxy linemarking paint which cures in only 15-20 minutes at 20oC.
  • Dries in only 20 minutes @ 20°C.
  • Will withstand heavy traffic in as little as 2 hours
  • Safe, non-slip textured surface version also available
  • Applied by brush, roller or airless spray

* Required Fields

Reset Options

Quantity Calculator

Quickline EP


You may also need

Price for all selected : £0.00
  1.    This itemQuickline EP



Quickline EP has been specifically designed to adhere to almost any road surface including concrete, tarmac, blacktop, block paving and wood, and is excellent for use on roads, pedestrian crossings, car parks, helipads, runways, as well as general linemarking in warehouses and factories.

A minimum thickness of 150 microns is recommended.

A 5kg unit of Quickline will achieve approximately 120 linear metres at 100mm wide.



Number of parts:1
Application Temperature:Above 5oC
Curing Time @ 20oC:Touch dry: 10 minutes
Fully dry: 15-20 minutes
Full traffic: 2 hours
Coverage (5kg):120 lin.m. at 100mm wide

Please consult the technical data sheet for full technical product data.

View FileQuickline EP Technical Data Sheet    Size: (386.44 KB) View FileQuickline EP Safety Data Sheet    Size: (143.3 KB)


Do not apply this product is the surface is damp, wet or frosty.
Ensure surfaces are clean, dry and free from any loose material. Remove any contamination, including dust, oil and laitance.
New concrete must be allowed to fully cure which can take up to 3 months. New tarmac needs several months to weather before painting. In all cases a small area should be tested before application.
If Quickline EP is to be used on synthetic surfaces (i.e. sports pitches, etc.) or where previous line markings exist, we strongly recommend testing on a small area to check the substrate or previous coating will provide a sound bonding to the new product.

Mix thoroughly before use.
Quickline EP can be applied by a lining machine, airless spray (tip size 11-13 thou), conventional spray or brush for small areas or lines.
If the concrete/tarmac is particularly porous, a thinner first coat should be applied to seal the surface. This should then be followed by another coat applied 1-2 hours after the sealer coat. A minimum thickness of 150 microns is recommended.


Product Questions

No questions yet. Be the first to ask the question!

Customer Reviews

Login, and be the first to review this product

Add a Review

Other Products You May Need

  • Paint Brushes

    Paint Brushes

    From Only: £2.25
    For applying floor & roof coatings and solvents.
  • Professional Roller Kits

    Professional Roller Kits

    High quality easy to use and long lasting roller kits
  • Mixing Paddles

    Mixing Paddles

    For thorough and effective mixing of two-part products.
  • Quickcoat EP Tarmac Paint

    Quickcoat EP Tarmac Paint

    From Only: £129.90
    Quickcoat is ultra fast drying tarmac paint for car parks, paths, roads and cycleways – tack free in only 20 mins and slip resistant. Choose from 11 colours.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Please wait...

Product Successfully Added to Your Cart