ZP Primer

More Views

ZP Primer
Specialist metal epoxy primer
  • Very easy to apply
  • Ideal for food environments
  • Outstanding adhesion to metal
  • Safe to use – non-toxic, non-taint

Quantity Calculator

ZP Primer
5 kg

£88.90
  • Buy 5 for £85.79 each
  • Buy 10 for £81.93 each
  • Buy 20 for £78.65 each

You may also need

Price for all selected : £0.00
  1.    This itemZP Primer

Request Quote
Or call: 0800 980 0852 / 01234 846400

Details

Details

ZP Primer is an epoxy priming coat especially formulated for outstanding adhesion to metal surfaces.


Use on: Metal, concrete. For other substances contact Polycote Experts.
Use where: Internal/External
Typical industries: Animal, medical, food processing and working environments
Type of job: Preparation of metal and other substrates prior to overcoating with Polycote Flortex coatings
Approximate coverage: 5 kg unit - 20-25m2
Special features:Non-toxic, non-taint, high adhesion, easy to use
Specifications

Specification

Pot life:30 mins @ 20oC
Application temperature:10oC - 30oC
Cure time: Pedestrian traffic - 6 hours @ 20oC
Light wheeled traffic - 24 hours
Heavy duty traffic - 36 hours
Number of parts supplied:2
Priming for:Polycote Flortex products

Please consult the technical data sheet for full technical product data.

View FileZP Primer Safety Data Sheet    Size: (168 KB) View FileZP Primer Technical Data Sheet    Size: (263.4 KB) View FileZP Primer - Technisches Datenblatt    Size: (531.62 KB)
Application

Application

Preparation:
Thorough substrate preparation is essential.
Recommended methods are:
Loose paint or rust – remove, using a Vacuum Assisted Shotblaster, Floor Grinder or equivalent mechanical abrasion method. All loose/flaky paint and rust must be removed before coating.
Oil or grease – chemically clean with Polycote Degrease IT then rinse thoroughly and allow to dry. See relevant Data Sheet prior to application.
Existing Paint – this should be fine, as long as the area is clean and dry, however we advise that a test patch is carried out prior to fully overcoating.
Once prepared, the area must be kept clean and free of traffic.


Mixing:
Having fully prepared the substrate, stir the individual components before mixing together.
Add part ‘B’ to part ‘A’ and thoroughly mix for at least 3 minutes. For best results use a slow speed drill with a mixing paddle.
Ensure thorough mixing as an unmixed product will result in a poor or non-cure situation.


Application:
Apply by brush, roller or squeegee, making sure that the surface is completely covered. Particular attention should be given to doorways and other areas of high traffic.
When finished, DO NOT scrape the remaining contents from the container as this will invariably include unmixed raw resin.

Q&A

Product Questions

No questions yet. Be the first to ask the question!

Customer Reviews

Login, and be the first to review this product

Add a Review

Other Products You May Need

  • Paint Brushes

    Paint Brushes

    From Only: £2.25
    For applying floor & roof coatings and solvents.
  • Professional Roller Kits

    Professional Roller Kits

    From Only: £57.32
    High quality easy to use and long lasting roller kits
  • Etch IT

    Etch IT

    From Only: £29.80
    Acid-based etching solution for surface preparation – etches almost any surface.
  • Degrease IT

    Degrease IT

    From Only: £29.58
    Powerful degreaser for surface preparation – ideal for removal of heavy grease, oils and fats.

Please wait...

Product Successfully Added to Your Cart