DetailsFlortex Clearseal is an easy to apply clear concrete floor coating for dust proofing screeds, blockwork and rendered walls.
Ideal for factory and warehouse floors, kitchens, food processing areas, garages, workshops, production and plant areas.
A clear, high solids synthetic resin emulsion, designed specifically to protect concrete from dusting. The low viscosity formulation ensures maximum penetration into the capillary pores, strengthening the substrate.
It is very easy to apply by brush or roller and will seal porous surfaces such as concrete screeds, tiles and brickwork
Coverage: approx 8-10m2 per litreFor a long lasting floor paint, try ,a href="https://www.polycote.com/uk/flortex-professional/">Flortex Professional.
Application temperature: 5oC - 30oC Initial cure time: 3 hours To accept foot traffic: 3 hours To accept vehicular traffic: 24-36 hours Overcoat (if required) time: within 6 hours Full strength cure time: 7 days Full tensile strength (MPA): 16.3N/mm2 Elongation: 350% Cured film hardness: 51 in 24 hours 64 in 7 days Number of parts supplied: 1 Coverage: 8-10 sq.m. per 1 litre Primer required: No Shelf life: 18 months Storage temperature: +5oC - +35oC
Please consult the technical data sheet for full technical product data.Flortex Betonversiegelung Technisches Datenblatt Size: (168.86 KB) Flortex Clearseal Safety Data Sheet Size: (98.41 KB) Flortex Clearseal Technical Data Sheet Size: (188.93 KB)
Floor areas must be clean, dry and free of all contamination. Oil and grease deposits may be removed using Polycote Degrease IT in accordance with relevant Data Sheet. The floor must be allowed to dry and cleaned and any dust or debris swept or vacuumed off. Wall surfaces to be sealed should be brushed dry to remove dust and loose material.
Stir well before use and do not thin. Flortex Clearseal may be applied using a soft brush or broom, a nylon pile roller or squeegee.
A thin, even, puddle-free first coat should be applied, and this must be allowed to dry thoroughly (at least 1-2 hours in warm, dry, well-ventilated conditions, longer if cold and damp) before applying the second coat.
Product QuestionsNo questions yet. Be the first to ask the question!
Other Products You May Need
For applying floor & roof coatings and solvents.
£66.90High quality easy to use and long lasting roller kits
£19.90For thorough and effective mixing of two-part products.
Powerful degreaser for surface preparation – ideal for removal of heavy grease, oils and fats.