Suitable for galvanised steel, aluminium, stainless steel, zinc, hard PVC, copper, ceramic tiles, porcelain, glass...
There's virtually no hard surface this primer can't grip. Re-coatable after just 30 minutes.
All previous coatings must be removed.
If necessary, clean surface by alkaline or high pressure/steam cleaning using detergents as appropriate to ensure complete removal of all grease, oil, or other surface contamination. Salts and light surface corrosion may be treated with Polycote Etch IT, see relevant Data Sheet.
The surface must be clean and dry during application.
Stir the primer thoroughly before use. Apply using a brush with long natural bristles, taking care to ensure the surface is completely covered.
Ensure adequate ventilation during application.
Product QuestionsNo questions yet. Be the first to ask the question!