Colormet Adhesion Primer is a water-dispersed product formulated to prime smooth, dense surfaces where other paint formulations would fail to adhere.
Use on: Galvanised steel, copper, zinc, polycarbonate and hard PVC, as well as wood, ceramic tiles, porcelain, glass, plaster, cement, bricks and other construction materials Use where: Internal/External
Approximate coverage: 2.5L – 20 - 25m2 depending on texture and porosity of surface Cure time: Touch dry – 20 minutes @ 20oC Ready for over coat – 24 hours Special features: Fast drying, Solvent free, Extra flexibility, UV resistance
Surface must be clean, dry and free of dust, dirt or any other contamination.
Polycote Degrease IT may be used to remove oil or grease, and Polycote Etch IT to remove light surface corrosion.
In general it is not necessary to provide a mechanical key by sanding smooth surfaces. Colormet Adhesion Primer WB will adhere to previous paint or coatings, but such coatings must be sound and you are advised to test a small area beforehand to ensure compatibility.
Stir thoroughly before use.
Colormet Adhesion Primer WB may be applied by brush, conventional spray gun (undiluted) or airless spray (undiluted, nozzle size 11, pressure 200 bars).
Product QuestionsNo questions yet. Be the first to ask the question!
Other Products You May Need
For applying floor & roof coatings and solvents.
Ideal for linemarking and easy to use.
High quality easy to use and long lasting roller kits
Top quality water based professional rust preventative metal gloss finish topcoat