- Details
-
Details
Typical Uses:
Ideal for marking both disabled and parent & child 'parking bays', to meet new regulations.
Polycote UK's Quickcoat EP is an advanced single pack epoxy formulation designed to allow the shortest possible downtime when demarcating car parks, paths and cycleways.
Available in 9 standard colours
- Specifications
-
Specification
Number of parts: 1 Application Temperature: 10oC to 25oC Drying Time: Tack Free: 20 minutes @ 20oC Open to traffic: 2 hours Coverage: 1 - 1.2 sq.m. per kg Please consult the technical data sheet for full technical product data.
Quickcoat EP Safety Data Sheet Size: (144.41 KB)
Quickcoat EP Technical Data Sheet Size: (282 KB)
Quickcoat EP - Technisches Datenblatt Size: (4 KB)
- Application
-
Application
Preparation:
Do not apply this product if the surface is damp, wet or frosty.
Ensure the surface is clean dry and free from loose or flaking material, dirt, grease and vegetative growth. Vacuum or pressure blasting with air or water may remove any debris. Friable or porous concrete should be stabilised first. If applying to new asphalt, any fluxes/oils will need removing before application. Any shiny surfaces may require special preparation, please contact Polycote for further details.
New concrete should be allowed to mature for several months before coating. The best period for application is between April and October while strictly observing coating temperatures and conditions.
Application:
Stir can well before use. Add the aggregate whilst stirring the product. Do NOT add any aggregate if applying by airless spray.
Apply an even coat either by brush, roller or by airless spray.
Airless Spray – Apply one coat for a closed surface. TIP – If you are to use airless spray we recommend a nozzle size of 35 thou.
Roller – Simply roller on Quickcoat EP. Do not pour onto surface, apply via roller. - Q&A
-
Product Questions
No questions yet. Be the first to ask the question!