Roof Tile Coat is a high quality acrylic coating that adheres strongly to concrete and fibre cement roof tiles, transforming the appearance and extending the roof life.
Roof Tile Coat is a high quality water-based 100% acrylic coating designed to seal and protect roof tiles against weathering and degeneration. Light-fast and durable with a semi-matt finish, Roof Tile Coat reduces the porosity of the tile surface, limiting water penetration for reduced roof load when wet, and prevents the cracking of tiles caused by freeze-thaw cycles.
Reduces porosity causing freeze-thaw cracking of tiles and seals loose surfaces. UV resistant and light fast. It also inhibits the growth of moss and lichen and binds loose friable surfaces, preventing the accumulation of sand in the gutters. Roof tile coat is the perfect answer for giving a new look to an old roof and is used extensively in refurbishment projects to create a smart uniform appearance over old/new tiles.
Unit size: 15L
Number of parts: 1 Application temperature: Not below 5oC Drying time: Surface dry: 2-4 hours Recoat time: 4-6 hours after 1st coat has dried, but preferably after overnight drying Coverage: Approximately 37.5m2 Number of coats required: 2
Please consult the technical data sheet for full product technical data.Roof Tile Coat Safety Data Sheet Size: (110.91 KB) Roof Tile Coat Technical Data Sheet Size: (399.78 KB)
Clean the surface by power washing. Stubborn moss or fungal growth may be removed with a stiff broom or wire brush if necessary. Treat any fungal residues with Polycote Destroy IT in accordance with relevant Data Sheet. Replace any broken or missing tiles and re-cement ridge and bonnet tiles as necessary. Allow roof to dry thoroughly before coating.
Roof Tile Coat may be applied by brush or spray. Two coats are recommended, allowing to dry between coats – approximately 4-6 hours, but preferably overnight.
Airless spray – use nozzle size 15-21 and 135 bars pressure.
Ensure product is thoroughly mixed beforehand.
At lower ambient temperatures the product may require thinning with up to 5% of water if spray applied.
Product QuestionsNo questions yet. Be the first to ask the question!
Other Products You May Need
For applying floor & roof coatings and solvents.
High quality 10" broom
£66.90High quality easy to use and long lasting roller kits
£58.70Fungicidal wash solution – ideal to prevent regrowth of algae and similar weeds on roofs, walls, ceilings and masonry.