Aquatex - Clearance

More Views

Aquatex - Clearance
Cement based waterproof wall coating – withstands equivalent of 5m head of negative water pressure.
  • 1 x 15L Unit in GREY (damaged return item)

* Required Fields

Reset Options

Quantity Calculator

Aquatex - Clearance
15 kg

£46.77

You may also need

Price for all selected : £0.00
  1.    This itemAquatex - Clearance

Aquatex - Clearance is available for purchase in increments of 1
Details

Details

Typical Uses:

Used for the tanking of basement and cellar walls to prevent the permeation of ground water. Also for sealing tanks and ducts, and is suitable for lining storage tanks for potable water.

Aquatex is a cementitious water-proofing system consisting of a blend of Portland cements, graded aggregates and chemical modifiers. Mixed simply with water to produce a liquid consistency that may be applied by brush or spray.

Aquatex has excellent adhesion characteristics, even when applied to damp surfaces and is approved under the Water Bylaws Scheme.

Available in 2 standard colours: White and Grey.

Specifications

Specification

Number of parts:1 (mix with water)
Application Temperature:Above 5oC
Curing Time:Between 5 - 8 hours depending on conditions
Coverage:25kg – 8-12m2
Shelf Life:Up to 12 months
Application

Application

Preparation:
The surface must be sound, clean and free of loose or friable materials.
Mould or algae must be brushed off and the area should be treated with Polycote Destroy IT.
Any oil or grease must be removed using Polycote Degrease IT, followed by thorough rinsing.
Please refer to relevant Data sheets.

Priming:
No priming is necessary.
Dry surfaces may be dampened with water to assist adhesion.

Mixing:
Gradually add the entire contents of a 25kg unit to 7.5 - 8.5L of clean water in a suitable bucket, mixing continuously while adding the powder.
For best results – use a heavy duty slow speed drill with a mixing paddle. Mix for at least 3 minutes after all the powder has been added until a creamy consistency is achieved.

Application:
Two coats should be applied using a brush or spray.
The first coat should be applied in a horizontal direction, and a 24 hour interval allowed before applying a second coat at right angles to the first.
Where water is penetrating under pressure, please contact Polycote technical helpline to confirm suitability and application method.

Q&A

Product Questions

No questions yet. Be the first to ask the question!

Customer Reviews

Login, and be the first to review this product

Add a Review

Other Products You May Need

Please wait...

Product Successfully Added to Your Cart