A solvent-free thixotropic two part epoxy wall coating designed for maximum chemical resistance. HyGlaze Bund Coat is a bespoke coating manufactured after you have specified the chemical protection required.
- As chemical resistant as you need it
- Applied by brush or roller
- Used in conjunction with WD Primer or EP Primer
Supplied in 5kg units.
Number of parts: 2 Application Temperature: 10oC to 25oC Pot Life @ 20oC: 20 - 30 minutes Initial Cure: 8 - 12 hours Re-coat time: When 1st coat is dry, but within 36 hours Coverage: 20m2 per 5kgs
Please consult the technical data sheet for full technical product data.HyGlaze Bund Coat Safety Data Sheet Size: (157.39 KB) HyGlaze Bund Coat Technical Data Sheet Size: (332.13 KB)
Thorough substrate preparation is essential.
Prior to application of Hy-Glaze™ Bund Coat, the surface should be primed with Polycote EP Primer or WD Primer, depending on the type of substrate. Please contact Polycote Technical Helpline and prepare the surface in accordance with the appropriate primer Data Sheet.
Should the time lapse between priming and top coat exceed 48 hours, abrade the primer to ensure intercoat adhesion.
Having fully prepared the substrate, stir the individual components before mixing together. Add Part 'B' to Part 'A' and thoroughly mix for at least 3 minutes. For best results use a heavy duty slow speed drill with a mixing paddle.
Ensure thorough mixing as an unmixed product will result in a poor or non-cure situation.
Apply by brush, roller or squeegee, making sure that the surface is completely covered. Particular attention should be given to doorways and other areas of high traffic. When finished, DO NOT scrape the remaining contents from the container as this will invariably include unmixed resin.
Two coats are recommended in areas of high chemical aggression.
The ambient temperature of the areas should not fall below 10oC throughout the application and curing period.
Product QuestionsNo questions yet. Be the first to ask the question!
Other Products You May Need
For applying floor & roof coatings and solvents.
High quality easy to use and long lasting roller kits
£18.90For thorough and effective mixing of two-part products.
Powerful degreaser for surface preparation – ideal for removal of heavy grease, oils and fats.