A self-priming water-dispersed epoxy coating with a high solid content, providing a totally sealed, easy cleaned surface resistant to oils and liquids.
The formulation includes high build fillers to increase the film thickness and provide good abrasion and chemical resistance.
- Easy application by roller
- Two coats normally required
Available in 6 standard colours: others on request.
Number of parts: 2 Application temperature: 10oC - 30oC Pot life @ 20oC: Up to 1.5 hours Initial curing: 16 - 24 hours Re-coat time: 24 - 48 hours Coverage: 30 - 40m2 per 5kg unit Number of coats: 2 Priming: Self-priming
Please consult the technical data sheet for full product technical data.
Thorough substrate preparation is essential.
All loose friable or flaking material must be removed, and the surface must be clean, dry and free of dust.
Any oil or grease should be removed.
Having fully prepared the substrate, stir the individual components before mixing together. Add Part 'A' to Part 'B' and thoroughly mix for at least 3 minutes.
For best results use a heavy duty slow speed drill with a mixing paddle.
Ensure thorough mixing as an unmixed product will result in a poor or non-cure situation.
Apply by brush or roller, making sure that the surface is completely covered. Particular attention should be given to any protrusions or other vulnerable areas. When finished, DO NOT scrape the remaining contents from the container as this will invariably include unmixed raw resin.
A second coat of Hy-Glaze™ WD should be applied after initial curing has taken place – approximately 16-24 hours.
Product QuestionsNo questions yet. Be the first to ask the question!
Other Products You May Need
For applying floor & roof coatings and solvents.
High quality easy to use and long lasting roller kits
£18.90For thorough and effective mixing of two-part products.
Powerful degreaser for surface preparation – ideal for removal of heavy grease, oils and fats.